Sample 20 meters - Nylon PA12 + GF15 Natural 1.75mm Fiberlogs with Glass Fiber

PA12 + GF is a modification of the already durable Nylon fiber PA12, which was improved by adding 15% glass fibers. Compared to the polyamide itself, this composite is significantly increased by the total durability of the printing and its stiffness (3.6 GPa) and chemical and thermal resistance (up to 170 ° C). Due to the low susceptibility to shrinking and high dimensional stability, the PA12 + GF15 Fiberlogs string is also suitable for use in printers that are not equipped with a heated chamber. It also offers a greater degree of flexibility than nylon with carbon fibers, so it is ideal for applications that work at a variable load and are exposed to impact. Due to high abrasion for printing, we recommend using hardened steel or ruby ​​nozzles to avoid excessive wear

properties:

• Perfect combination of high resistance and impact resistance
• spatial stability
• resistance to high temperatures (up to 170 ° C) and chemicals
• Material fatigue resistance
• Possibility to print on open printer

Use:

• Cars: elements in engine compartment, vehicle parts cover, air supply, filler liquids
• Industry: spare parts, short series, utility patterns
• Medicine: Prosthesis, Medical Equipment
• Sport: accessories, pads, airsoft elements

How to Print: nozzle temperature 255-270 ° C nozzle temperature 90-110 ° C closed chamber Recommended fan 0-25% Flow 90-100% printing speed 35-60 mm/s Recommendation for print pad PEI, glass, adhesive tape Retraction (Direct) 2-3 mm Retraction (Bowden) 4-6 mm speed of retraction 20-45 mm/s Note The material is very abrasive. We recommend a hardened or ruby ​​nozzle for printing. If possible, use gloves when handling (you can hurt yourself on a rough surface). It is also advisable to use a protective and mask in post processing - grinding, polishing, cutting, etc.