【 ABS 】 ABS FILAMENT with higher strength, toughness and better heat resistance, wear and impact resistance. The material is compatible with most 3D printers. that have an excellent finish and are very accurate. (Depending on the printer)
【 Without knocking and clogging 】 Material with excellent circularity and very low diameter tolerance, does not overlap or swallow. It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder.
【 Vacuum closed packaging 】 Pure material weight: 0.5 kg. ESUN FILAMENT SELLED IN A CLOSABLE PACKAGING, which keeps it dry and out of dust and foreign particles, prevents nozzles and provides smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- coil size: diameter 200 mm - width 38 mm - center hole 57 mm
- pack size: 216 x 202 x 76 mm
- weight Package: 0.9 kg
- nozzle temperature: 220-260 ℃
- pad temperature: 90-110 ℃
- density: 1.04 g / cm3
- melt Flow Index: 12 (220 ° C / 10kg) g / 10min
- tensile strength: 43 MPa
- extension at a quarry point: 22%
- bend strength: 66 MPa
- fault strength module: 2348 MPa
- notch toughness: 19 kj / ㎡
- deformation temperature: 78 (° C, 0.45MPA)
- manufacturer: Esun
Warning:
photos are only illustrative.
Doplňující informace
| Kategorie: | ABS |
| Barva: | fialová, oranžová, zelená, modrá, červená, bílá, černá, hnědá, růžová, natural, zlatá, stříbrná |
| Váha materiálu: | 0,5 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,03 mm |
| Teplota podložky: | 90-110°C |
| Teplota trysky: | 220-260°C |
zł57,63
zł47,63 bez DPH